|Aftco Fiberglass Gaffs|
AFTCO fiberglass, tapered gaffs feature a special thick-walled, extremely strong but lightweight e-glass handle construction custom made for extreme strength and rigidity. All of our fiberglass handles are made on proprietary mandrels using specific tapers developed by AFTCO
|Aftco MST-1 Tailer|
The AFTCO “Tailer” helps you bring a boated
fish under control quickly and safely, is the
ideal way to control fish while you measure
them for legal size, and can be a big help in
lifting fish as heavy as 100 pounds into the
|Aftco 3612-HB King Mackerel Two Piece Gaff|
Ideal for the king mackerel tournament fisherman,
the new AFTCO 12-foot, Two-Piece Gaff
features a black anodized shaft that is divided
into an eight-foot forward section with hook,
and a four-foot rear section, complete with two
rugged black vinyl grips. This new gaff is constructed
from the same 6061-T6 marine grade
aluminum that’s a feature of other gaffs in the
AFTCO line, and is joined in the middle with a
ferrule and collet nut characteristic of the
AFTCO Unibutt, the standard for the industry.
|Aftco Taper-Tip Flying Gaff|
The slim, tapered shape of AFTCO's Tapper-Tip Flying Gaffs slice through water faster and with greater accuracy to minimize the problems of gaffing powerful fish. The shafts are made from corrosion-resistant marine aluminum and they are "swaged" for uniform strength from end to end, but with no unnecessary weight. The hook seats in a tough plastic insert fitted to the gaff tip, and is held in place by a length of 20-lb. test line tied to the steel post affixed to the shaft. When a fish is gaffed, this line snaps, providing a clean and immediate release.
|Aftco Tag Stick|
The slim, tapered shape of AFTCO's Tag Sticks make them lightning fast in the water - easier to maneuver with pinpoint accuratecy. They're stronger and lighter too, with shafts made from corrosion-resistant marine aluminum and they are "swaged" for uniform strength from end to end, but with no unnecessary weight.
|Aftco Taper-Tip Aluminum Gaffs|
The slim, tapered shape of AFTCO's Tapper-Tip Aluminum Gaffs make them lightning fast in the water - easier to maneuver and deadly accurate. They're stronger and lighter too, so they bring fish into the boat with less flailing and confusion. The shafts are made from corrosion-resistant marine aluminum and they are "swaged" for uniform strength from end to end, but with no unnecessary weight.
|Aftco Molded, Glass- filled Polypropylene Fish Bat|
AFTCO’s new FB-2 Fish Bat is replacing the old FB-1. The FB-2 is made of super-strong, molded, glass- filled polypropylene. The new FB-2 is 19 inches long and 2 _ inches wide with a special triangular shape that will not roll around on the deck of a rocking boat. The handle has an aggressive, molded-in, textured grip for non-slip performance with wet or slimy hands. It is totally waterproof and corrosion proof, will not scratch or mar decks or gelcoat, and it floats! There is a braided rope safety lanyard and a special handle hook to allow the fish bat to be hung from a railing or ladder. It is slightly heavier than the discontinued, aluminum FB-1 at 1.3 pounds, and it hits very hard!
|Aftco Polyester Mesh Bait Nets|
The woven polyester net — a commercial-grade, knotless, bait-friendly mesh, designed to last for many seasons of heavy use — is the perfect choice for more delicate baits like anchovies, menhaden and sardines. The D-shaped stainless steel net hoops, available in 8 and 10-inch widths, allow for easy capture of the liveliest baits because they’ll reach into the corners of the bait well. The net attaches to the net hoops with a special PVC coil that not only eliminates abrasion to the netting, but minimizes damage to baits during the scooping process, as well as protects the inside of the tank from being scratched or chipped by the stainless hoop. AFTCO Bait Nets feature Gold anodized aluminum handles, with black vinyl grips.
|AFTCO Stand-Up Fishing Belts|
Aftco Fighting Belts are designed to be the ultimate fighting belt with it's advanced design, materials and comfort. The super-thick, closed-cell EVA foam back pad is engineered to maximize both comfort and leverage, so that when the belt is positioned releatively low across the thighs, the load is distributed evenly for maximum pull when fighitng big fish stand-up style.
|Aftco AFH-1 Maxforce Harness|
For fighting big game fish stand-up style, the AFTCO Maxforce™ is the ultimate in harness design for 30-130lb tackle. The combination of lumbar and sit-in pads distributes the load below the hips, allowing the lower body to exert maximum pulling leverage with superb comfort under heavy drag loads.
|Aftco Alijos Fighting Belt|
The Alijos fighting belt is designed for use with 20-50lb. lines and is the perfect day belt for stand-up tussels with sailfish, dolphin, kingfish, small tuna, yellowtail and other smaller to medium-sized gamefish.
|Aftco Maxforce II Shoulder Harness|
The AFTCO Maxforce II Shoulder Harness is the perfect choice for stand-up battles when using lighter tackle applications up to and including 50-lb. test line.
|AFTCO Great Barrier Reef ''GBR'' Harness|
The AFTCO GBR Harness was designed in conjunction with I.G.F.A. Hall of Fame Captain Peter B. Wright and tested on giant black marlin on the Great Barrier Reef in Australia. The GBR Harness is the ultimate tool for applying maximum amounts of drag pressure when fighting giant game fish from the fighting chair. The GBR is designed to be used with the “stiff-legged” technique using 80lb- Unlimited tackle in fighting chairs with seat widths over 20 inches wide.
|Aftco Drop Straps Kit|
Designed by AFTCO for Stand-up Gear but can be adapted to any belt or harness. Great for any fishing belt or any fighting harness. Comes in one size.