Boone Deluxe Crimping Tool SS 06001
Boone's Deluxe Heavy duty 10 1/4'' Crimping Tool has a carbon steel chrome-plated tool head, and stainless steel handles with non-slip custom grips.
|Boone Deluxe Crimping Tool - 10'' - heavy duty - stainless steel handles||$31.99 USD|
Boone's Deluxe Heavy duty 10 1/4'' Crimping Tool has a carbon steel chrome-plated tool head, and stainless steel handles with non-slip custom grips. The Deluxe Crimping Tool provides for four crimping sizes: 0.1-0.5, 0.5-1.0, 1.0-2.0 and 2.2mm.
2.5 Stars based on 3 reviews
August 2, 2017
Good idea, poor design
There is a lot of "slop" in these crimpers, which is why I don't think they work very well. I tried tightening the bolt down but ran into friction problems. I like the idea of stainless, but other non-stainless brands simply work better.
September 17, 2013
When squeezing down on crimpers, crimp is not compressed evenly. Even when lightly crimped, the crimp becomes lodged in the tool. Tool does not function properly. Holes drilled out for the different crimp sizes are not round. Holes are oblong, and do not match to make an even crimp. I provided a picture. Look carefully, holes are not aligned with eachother and sloppy drilled. These are brand new!!!
ProsSmooth grip, appears to be less corrosive than other painted crimpers. Priced fairly if functioned properly.
ConsNot manufactured properly. Should not of left the assembly line. Would have failed a test. Even when lightly crimped, these crimpers will not crimp properly. Crimp becomes lodged in tool. Im out $30 something dollars. Holes not drilled properly, un- even bite from tool. Misaligned.
June 21, 2013
I've owned several crimping tools, and this one is by far the best. I you make up leaders on a regular basis, these are a must.
3 Questions & 3 Answers
from Mass asked:
July 12, 2015
can you do double barrel crimps with these?
Yes you can.
on July 16, 2015
from Toronto, Canada asked:
May 12, 2015
I am looking for something like this for an industrial application, I need to crimp a single barrel crimp to 0.012" dia. music wire, would this tool work and what crimps could I use? Thanks
Gerry, As long and the single barrel crimp does not exceed 2.3 mm you should be able to use this tool with no problem.
on May 12, 2015
from firstname.lastname@example.org asked:
April 8, 2015
Will this crimp 2.3 aluminum sleeves
Leonard, These have since been redesigned and will crimp 2.3mm crimps.
on April 8, 2015