Track Orders
Don't know your order
number? Log in
E-Z Out-Rodder Rod Holder Pair

E-Z Out-Rodder Rod Holder Pair

Price: $199.00
TD Code
E-Z Out-Rodder
E-Z Out-Rodder Rod Holders
1 Pair
$199.00 USD
Turn your fishing rod into an outrigger!

The E-Z Out-Rodder has been tested by professional guides used since 2004 with wire line for Striped Bass and Bluefish, as well as for Tuna and White Marlin in the canyons. The E-Z Out-Rodder has also been extremely successful in Canada for Salmon and huge Lake Trout, and in Florida for Wahoo and Sailfish.
  • Insert into any flush mount rod holder.
  • Positions rod out and away from boat.
  • Rod holder is hinged to adjust rod position from horizontal to vertical in seconds.
  • Cover more water, avoid tangles, create a wider spread for drift or trolled baits.
  • Safer than ordinary rod holders - no more leaning over gunwale to remove rod.
  • Package contains two E-Z Out-Rodder rod holders.
The E-Z Out-Rodder is constructed of marine grade, brushed anodized aluminum and locks into any standard gunwale mounted rod holders, making it totally portable from boat to boat. Maintenance is easy, simply wash with soap and water after each use and put a coat of aluminum polish on at the end of the season.

Unlike the standard Out Rod holder which is fixed in a horizontal position, the E-Z Out-Rodder is hinged so that it can be easily lifted upright into a vertical position. You donít have to struggle anymore when removing your rod from the E-Z Out-Rodder, as you would with a standard rod holder. When a fish is hooked, simply pull out the safety pin and bring the rod holder to an uprigt position. Lift the rod out of the holder and reel in the fish.

How to use the E-Z Out-Rodder

E-Z Out-Rodder - How to Use
Step 1:
Place the E-Z Outrodder in the gunwhale mount rodholder.
Step 2:
Place fishing rod in the E-Z Outrodder and lock in gimble. (You should always use a safety line at least 6 feet in length from your reel to your cleat.)
Step 3:
When a fish is hooked, grab your rod and pull gently toward you and release the pin.
E-Z Out-Rodder - How to Use
Step 4:
Lift the rod and E-Z Outrodder to a vertical position.
Step 5:
Lift the rod out of the E-Z Outrodder with a slight pull towards you and reel in the fish.
4 Stars based on 19 reviews
By Kevin B.
Cheyenne, WY
September 7, 2017
Great Alternative to Outriggers
I was looking for a way to spread my lines while fishing offshore in the Keys. Since I have a 24' bay boat, I really wanted to avoid the cost of adding big/expensive outriggers to the t-top. Found these online, did some research and bought them. Spent a month in Key Largo and was able to get offshore quite a bit, so I really put these to the test. They didn't spread the lines as much as I'd imagined, but with 7' rods they got the job done. Allowed me to run up to 5 lines on my trolling setup. Easy to use in transition, even with the chaos of triple mahi hook-up, which was good since most of the time it was just my wife and me on board. She also found them very functional and easy to use which of course made me happy...happy wife, happy life. Only reason for 4 star rating is lack of rod leash being included because they are absolutely necessary to prevent potential loss of gear, especially in rough water. I bought parachute cord and clips from K-Mart and made my own rigs (see pic), which saved my a** from losing gear twice for sure. Highly recommend this product and TackleDirect.
ProsEconomical Sturdy Ease of use/functionality
ConsRod leash not included
By Anthony
New York
February 4, 2017
E Z Outrodder
Fast shipping as usual, great looking product, can't wait to use them!
By Sal
Ocean off Long Beach, New York
December 2, 2016
Worked great on Parker 25
This was just what I needed for my boat to separate the fishing lines .
By Clay
Sarasota, FL
November 24, 2016
Powder coating made it perfect
Without a doubt, the best gunnel mounted rod holder on the planet. The only thing I had to do to make it perfect was to have them powder coated to match the boat.
By Mark
Forked River, NJ
May 23, 2016
EZ Outrodder
Nice item, solidly built. Remember to keep the drag in a somewhat light setting, A locked down drag has the potential to bend the outrodder.
ProsDoes what it is designed to do.
ConsAluminum material has the potential to bend in a heavy drag scenario...
By Ben
South Shore - Long Island
May 22, 2016
E-Z Out Rodder's for Trolling
Definitely and must have when trolling for any game fish. They work great, keep lines spread apart and make a huge difference when you're hooked up and need to get the rod quickly.
ProsBest rodder on the market
ConsNot really a Con - Wish they came with the safety harness.
By Joe
Staten Island, NY
December 4, 2015
Great Price
Simply the best outriders I ever used.
By Rodrigo
Easton, PA
September 21, 2015
great out rodder rod holder
these are very durable and sturdy.
Prosthey turn up and down and have a looking gimble.
Consthe cotter pin is tried with 100# mono line.... a couple of weeks and mono broke. stainless steel cotter pin fell overboard. Called Tony Maja and the mail me out a new one right away... replaced the 100# mono with parachute cord.
By Tony Jensen
Virginia Beach
July 9, 2015
Does anytone read directions?
If you warped the bottom of the out rodders you obviously do not read directions. you cannot keep a really tight or locked drag. No outrodder will last!
ProsExcellent product
By Neil Axelrod
Long Island
July 9, 2015
Great product! As are all of his products.
The E-Z Out-Rodder is such a great product. You can now just snap the rod from it's down position to straight up into the boat without hassle. Read the directions to not have a locked drag or tight drag. If you do this the outrodder will last a long time. Tony's products are all made well and work!
ProsYou can now just snap the rod from it's down position to straight up into the boat without hassle, no struggling on side of boat with fish on.
By Edward Keslo
Staten IslandN.Y.
July 9, 2015
EZ outrodder one of a kind!
I had just purchased my second pair for my house in Florida. If you read the directions, to not used with a tight or locked drag they last as long as you want. I've been using mine 4 years with no problem at all. Makes trolling so much easier and there is nothing to compare. All of their products are made to last and catch big fish.
ProsBuilt to last as long as you read instructions. the hinge to bring the pole in the boat before you take it out of the rod holder is an option that you cannot compete with. I have caught my 1st and second 50+ lb. striped bass on Tony Maja Rod, rod holder and soons. Thanks Tony!
By Mark
Staten Island
June 23, 2015
Can I minus stars?
First fish starboard holder 20 lb striper bent lower part of holder so it can't be removed from holder .. Second use port holder same thing Except it twisted and no longer safely holds rod , called tackle direct Was told I can't Hav a return label but if I pay to ship back they would consider a refund after 10 min of me explaining I'd never use them again I was emailed a return label.... Rod holder garbage ..../ service , annoying that I even had a problem about return
ConsLol read above .... Maybe the auto fish release
By Dave
Long Island
June 5, 2015
Sweet Product
It's superior to any general rod rigger. Because it is the same as the others in the "down position" but articulates for rod removal if you want it to. The metal has a sweet weld on it. Just a seriously nicely made product. Wasn't sure what to expect, but... I saw them becoming difficult to find available, so I scooped it up. Glad I did. 👍👍
By cristian
Lake worth, FL
May 3, 2015
practically an outrigger great for seperating the rods while trolling offshore
By Jack
South East Massachusetts
April 7, 2015
Great Product
The ability to allow the rod to pivot is great.
By Rusty balls
Allentown pa
June 11, 2014
Nice item
A little pricey but I like the locking feature that u can't pull them out of the gimbal mounts
By Chris
Honolulu, Hawaii
May 9, 2014
Dont waste your money!
I was excited when I first received this but once I used it I realized that I wasted $200 on this piece of junk. I used it on my boat with two 6 foot poles. After a couple strikes, the bottom started to bend. It's not built to last.
ConsAluminum base warps too easily. Overpriced.
By Tunaman
June 5, 2013
Don't Fit
If you have Smith holders that have a flat bar at the bottom and not a rod you will have to modify theses holders to fit . They also won't work in holders that are set angled outward . Some of the other holders have multiple slots to accept the angle . Not these . I am not sure why they used tubing and not solid bar for the rod holder tube . Mine had started to crack so i have cut them off and made a solid Delrin insert with a Smith Locking slot . Added one more hole in the plate so i could have the rods at a bit of an upward angle . Also added a SS Ball plunger so i don't mess with supplied Pin accept when running hard.
ProsNone for me .
ConsToo many to list . Engineering could of been much better . Probably a cost trade off .
By Brett Stone
Dennis, MA
February 5, 2013
Best Rod Holder on the Market
I've used plenty of Rod Holders over the years, but this is the only rod holder I have used that swivels up/down to make it easy to get the rod out of the holder. If you have a large fish on the line which is pulling really hard, some rod holders can get stuck making it difficult to take the rod out of the holder. The EZ Out Rod Holder never gets stuck, and its always easy to remove it from the holder to fight the fish. Great Engineering here and I would highly reccomend it to anyone looking for a quality rod holder.
ProsRotates Up/Down Easy to remove fishing Rod
ConsIt has 2 positions to lock the rod in to the holder, but they could have easily added a 3rd position. I modified my holder to have a 3rd position using a drill bit. Works like a charm.
1 Question & 1 Answer
from New Jersey asked:
April 4, 2016
Can these be used in 30 degree rod holder that slant out towards water
1 Answers
Yes, it will fit and work with a 30 degree angle rod holder.
on April 5, 2016

Related Products
Similar Products
Daiwa Tactical Tackle Backpack
Our Price: $149.99
YETI LoadOut Bucket
Starting at $39.99
TackleDirect Flexfit Twill Snapback Hat
Starting at $29.95
Sign up for exclusive sales and offers
Be the first to know about product news, exclusive sales and events.
Florida Exotics
Fri, 20 Oct 2017
Alberto had me running and gunning all night long with various beasties, something I never knew existed opening my eyes to some freshwater fish with some bad ass attitudes. As I sit writing this in idyllic poolside comfort at the B Ocean Resort... Read More
In-Store Events & Promotions
TackleDirect Huge 6 Day Sale!
Nov 23rd-28th 2017
New product reviews and guides
Contact Us
Call or visit our retail store today! 6825 Tilton Rd Bldg C
Egg Harbor Township, NJ
08234-4426, USA
1-888-354-7335 Toll Free US/CAN
1-609-788-3819 DIRECT INT'L
8am-6pm ET Mon - Fri
9am-6pm ET Sat
© 1997-2017 TackleDirect® All rights reserved