Ritchie RA-93 RitchieAngler Compass - Surface Mount

Ritchie RA-93 RitchieAngler Compass - Surface Mount

Price: $92.59
Model
TD Code
DescriptionColorMountPrice
RA-93
RIT-0045
RitchieAngler CompassGraySurface Mount$92.59 USD

The RitchieAngler Compass features built-in compensators to easily adjust for deviation.

  • 2-3/4" Direct-Reading Dial
  • Surface Mount with Push-Button Removal for Quick Storage and Security
  • No-Glare Gray Finish with High-Visibility Blue Dial
  • Distinctive RitchieAngler Graphics
  • Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement
  • Internal Marine Night Lighting
  • Built-In Compensators to Easily Adjust for Deviation
  • Movable Sun Shield
  • DirectiveForce Magnets
  • 100% Repairability
  • Exclusive 5-Year Ritchie Warranty
2 Questions & 2 Answers
GEORGE
from APPLETON, WI asked:
January 18, 2018
IS THIS COMPASS LIGHTED, FOR NIGHT OPERATION?
1 Answers
Hello George, It does come with what Ritchie calls "Internal Marine Night Lighting"
Bernie
on January 19, 2018

Dave johnston
from Iowa city iowa asked:
January 15, 2017
Is 'tihis an adhesive flush mount or have to drill holes ?
1 Answers
The manual states as followed - Remove the base by “squeezing†the buttons on the side of the housing while carefully pulling on the base. Mount the base as instructed (see Installation above). Re-install the compass and begin compensation (see Compensation instructions below). Note: the mounting holes for this model are slotted, so by centering the mounting screws within the slots you can install all screws and make your alignment corrections later. Mounting pads are provided if you do not wish to drill any holes. Remove the mounting pads from their backing and stick them over the mounting slots. Because alignment is difficult to veriify at this time we suggest temporarily securing the base (masking tape works well) until after compensation. After alignment has been verified, make a small pencil mark at the front and back of the compass and deck. Remove the remaining backing from the pads and secure the base to the deck using the pencil marks as a reference.
Donald
on January 18, 2017

#HookedOnTD

Show off your fishing gear investment. Please post images and videos of your fishing gear, apparel, catches and lifestyle shots on and off the water. Let's see what you've got for a chance to win FREE gear! You can use #HookedOnTD or UPLOAD YOUR IMAGE HERE to make it onto our product pages or gallery. See something you like? You can shop directly from the images we post when gear we sell is featured!