Simrad GO9 XSE Chartplotter/Fishfinders

Simrad GO9 XSE Chartplotter/Fishfinders

$949.00 - $2,699.00
Earn 949 - 2,699 Reward Points   Learn More...
Model:
Qty:

Model
TD Code
DescriptionPrice
000-13210-001
SMR-0246
GO9 XSE Chartplotter/Fishfinder w/ Worldwide Basemap (No Transducer)$949.00 USD
000-13212-001
SMR-0247
GO9 XSE Chartplotter/Fishfinder w/ Worldwide Basemap and TotalScan Transducer$1,199.00 USD
Qty:
Oversize
000-13211-001
SMR-0248
GO9 XSE Chartplotter/Fishfinder w/ Worldwide Basemap and Medium/High DownScan Transom Mount Transducer$999.00 USD
000-13763-001
SMR-0249
GO9 XSE Chartplotter/Fishfinder w/ Worldwide Basemap, TotalScan Transducer and 4G Radar Bundle$2,699.00 USD
Qty:
Oversize

Simrad GO9 XSE Chartplotter/Fishfinders feature a 9-inch widescreen multi-touch display with built in Echosounder, GPS and Wi-Fi, as well as NMEA 2000 and radar interface.

Simrad GO9 XSE Chartplotter/Fishfinder Features:

  • Easy to use, 9-inch, tablet style, high brightness touchscreen
  • Built-in advanced echosounder capable of displaying Sidescan, Forwardscan, Downscan, and CHIRP images
  • Easily and safely navigate using your favorite cartography (CMAP, Navionics, Insight)
  • Built-in WiFi for internet downloads of charting & software, and mobile device mirroring
  • Direct Autopilot, Audio, engine, and communication connection and control over NMEA2000
  • Radar port for connection to Simrad solid state radar
  • Determine depth & bottom type, and find fish using one many available echosounder technology options
  • Simple and quick control of NMEA2000 connected entertainment systems
  • Vessel circuit control when connected to C-zone digital switching system
  • View and monitor engine data while underway
  • Low Profile Glass dash styling
  • Advanced NMEA2000 networking
  • Built in 10 Hz GPS antenna
  • Built in echosounder (Broadband & Chirp)
  • Built in Forwardscan Imaging (transducer required)
  • Built in DownScan and Sidescan Imaging (transducer required)
  • Dual Micro SD card slot
  • Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners
  • Compatible with OP40/OP50 Remote


More Features and Specifications

Simrad GO9 XSE Chartplotter/Fishfinder Specifications:

  • Casing: PC/ABS
  • Operating temp: -15°C to +55°C (+5°F to +131°F)
  • Water ingress: IPX6 and 7
  • Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE
  • Screen brightness: 1200 nits
  • Screen resolution: 480 x 800 (H x W)
  • Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60
  • Operating voltage: 10 - 17 V DC
  • Current draw at 13.6 V (sonar off, max B/L): 1 A
  • Low power standby mode: yes
  • Protection: reverse polarity and temporary over-voltage to 36 V
  • Alarm output current: 1 A max
  • Processor: iMX61 single core
  • Conformity: CE, C-Tick
  • NMEA 2000 (compliant): 1 port (Micro-C male) -,network load 1 LEN : 1 combined port Power and NMEA 2000 (7 pin connector)
  • Sonar 1 port (9 pin connector) Radar 1 port (5 pin Ethernet connector)
  • Card reader: Dual microSD
4 Questions & 4 Answers
Steve
from Great Lakes asked:
November 21, 2017
Does the forward scan, down scan and side scan work with the total scan transducer?
1 Answer
Hello Steve, The forward scan would be on a different transducer.
Submitted by: Bernie on November 22, 2017

Mark De Speville
from Mauritius asked:
January 16, 2020
HI 

What depth can we reach using the medium-high down scan TM transducer?


Can i use an TM 258 with this instrument? if yes do i need a special cable for connection?


Thx

1 Answer
2-400 feet down scan. 600 to 1000 ft depending on conditions with CHIRP sonar frequencies. Yes but you will only get 600watts and need a 9 pin adapter. Also, this is a very large transducer.



Submitted by: Chris Renna on January 16, 2020

Brando
from Oceanside California asked:
April 18, 2017
What frequency 50/200
1 Answer
50/200 are standard frequencies for most salt water sounding applications. 50Khz being for deeper water, and 200Khz used generally in more shallow water.
Submitted by: Chris on April 19, 2017

TJ
from Ormond Beach, FL asked:
January 20, 2017
What bronze or stainless through-hull transducer will give me optimum use of the GO9 XSE
1 Answer
You will not be able to take advantage of Sides can with a Thru Hull but will be able to use Down scan and traditional FF frequencies. You will need an XSONIC Bronze HDI Transducer Thru Hull 50/200 455/800 with 9 pin connector and 10M Cable First you will need to find your hull angle.
Submitted by: Donald on January 27, 2017

#HookedOnTD

Show off your fishing gear investment. Please post images and videos of your fishing gear, apparel, catches and lifestyle shots on and off the water. Let's see what you've got for a chance to win FREE gear! You can use #HookedOnTD or UPLOAD YOUR IMAGE HERE to make it onto our product pages or gallery. See something you like? You can shop directly from the images we post when gear we sell is featured!